The Clean feature is ony available on select models. It allows you to add an additional backwash and rinse period to the beginning of every recharge cycle.
What is it?
The Clean feature adds an additional fast rinse period to your normal recharge cycles. We recommend using this feature if you have a water supply that carries high amounts of sediment or iron to help preserve the resin capacity.
RHS42 and RHW42 Models Only
We recommend starting low and increasing the duration of this cycle over time if needed. This will allow for higher efficiency and water conservation.
1. Hold the Select button down until '000' appears, then let go.
2. Tap the Select button twice to display 'Clean' and 'OFF' on the screen. Use the Up or Down arrow to switch this 'ON'.
3. Tap the Select button again to chose the duration of the clean cycle using the Up/Down arrows. This can be set from 1 to 15 minutes.
4. Continue tapping the Select button until you return to the home screen with the current time.
Comments
2 comments
If this setting is turned off, does a more brief backwash and rinse cycle still run? In other words, is this for extending the backwash and rinse time, or is it actually for adding one?
Turning this feature ON will extend the existing factory Backwash and Rinse stages that happen in every recharge cycle.
Please sign in to leave a comment.