Need help installing the top cover? You've made it to the right place. The top cover provides a housing for the control board, and protection for the electronics and other parts. Follow the steps below to attach it properly. Let's go!
1. You can start by locating the two clips on the inside rim of the salt tank. This is in the front of the unit. Go ahead and hook the front of your top cover onto these clips first.
2. You'll notice on the back of the unit there are clips below the inlet and outlet ports. Push the whole top cover down to secure the two clips in the back there.
3. For your last step, you'll snap the salt lid onto the front hinges of the top cover. You'll notice there's a circular part on the top attachment with a triangular piece missing on both the left and right ends. Go ahead and carefully push one end down to attach on the cover, then do the same to the other side. You're done!