Need to start a recharge manually? We've got you! This is quick and easy. Starting a recharge will put your softener into a two-hour cleaning cycle. If you're ready, read on below, otherwise check out our Recharge FAQs to learn more.
To Start a Recharge:
1. You'll want to first make sure the clock on the display is steady (not blinking) and showing the current time.
2. Go ahead and hold the Recharge button down, until you hear the motor start to turn, then let go. You'll notice that the motor only runs for a few seconds - this is normal. Then you should see a 'Recharge' indicator on the screen while the softener is in the recharge process (around two hours long). That's it! Quick and easy!
Please let us know if this article was helpful by voting below.